Stock code

300693

Active Voltage Conditioner Ride-through Storage

AVC-RTS

Active Voltage
Conditioner
Ride-through Storage

Ideal solution for voltage sag
Maintain your uptime as every second counts


What is
voltage sag?

According to IEEE standard 1159-1995, a voltage sag is defined as a decrease in rms voltage down to 90% to 10% of nominal voltage for a time greater than 0.5 cycles of the power frequency but less than or equal to one minute.
Characteristic of voltage sags High frequency of occurrence
The time of sag is unpredictable
Short duration and deep depth

to meet the customer's most
basic electrical stability requirements

Excellent
compensation effect

  • 100%

    Voltage full compensation
  • 2ms

    Typical 2ms response time, within 5ms
  • 3 / 1

    Three/single phase voltage sag compensation
  • Sinexcel AVC-RTS provides fast accurate protection against sags and swells as well as continuous voltage regulation.
    Even when the voltage drops to zero, the AVC-RTS can still support the loads of 100% rated voltage, 2ms typical fast response.

    approaching the
    limit of energy conservation law

    99% high efficiency

    Sinexcel AVC-RTS is an OFF-Line unit specifically designed to correct voltage sag and voltage swell. The inverters are usually in the standby state, only when the voltage exceeds the normal range, the inverter will start to work, which greatly saves energy consumption.
  • OFF-Line Structure Design
  • Energy Saving
  • Sinexcel AVC-RTS 300KVA

    Multi-layered redundance

    high reliability to ensure the normal operation

    Low operation cost
    fast return of investment

    Sinexcel AVC-RTS

    Capacity: 50/60KVA
    Voltage: 208/380/480/600V
    Dimension: 1200W*800D*1800H (mm) standard maintenance bypass

    Capacity: 100KVA
    Voltage: 208/380V
    Dimension: 800W*1000D*2200H (mm) standard maintenance bypass

    Frequency: 50/60Hz
    Voltage range: -20%~+20%
    Wiring method: 3P3W/3P4W
    Voltage compensate range: 0~130%
    Standard back up time: 3 seconds, can be customized

    N+1 inverter module redundancy design

    Sinexcel AVC-RTS

    Capacity:
    150/200/250/300KVA (208/380V/480/600V)
    450KVA (208/380/480/600V)
    600/900/1200KVA (208/380/480/600V)
    1500/1800/2400KVA (380/480/600V)

    Frequency: 50/60Hz
    Voltage range: -20%~+20%
    Wiring method: 3P3W/3P4W
    Voltage compensate range: 0~130%
    Standard back up time: 3 seconds, can be customized

    Optional maintenance bypass
    S<1200KVA, N+1 inverter redundancy design
    S≥1200KVA, N+2 inverter redundancy design

    Sinexcel AVC-RTS

    Capacity: 30/50/60KVA
    Voltage: 208V/480V/600V
    Dimension: 1600W*800D*1800H (mm)

    Capacity: 100/150/200/250/300KVA
    Voltage: 208V/480V/600V
    Dimension: 1400W*1000D*2100H (mm)

    Capacity: 450KVA
    Voltage: 480V/600V
    Dimension: 1600W*1000D*2100H (mm)

    Capacity: 600/750/900/1200KVA
    Voltage: 480V/600V
    Dimension: 3900W*1000D*2100H (mm)

    Capacity: 1500/1800/2100/2400KVA
    Voltage: 480V/600V
    Dimension: 5900W*1000D*2100H (mm)

    Frequency: 50/60Hz
    Voltage range: -20%~+20%
    Wiring method: 3P3W/3P4W
    Voltage compensate range: 0~130%
    Certification: ETL (UL 1778 Standard)

    Sinexcel AVC-RTS (CE, ≤100K)

    Sinexcel AVC-RTS (CE, >100K)

    Sinexcel AVC-RTS (CE, ETL)

    Customer case

    01
    Dongfeng Nissan Car factory
    Dongfeng Nissan Car factory
    In Zhengzhou factory, four sensitive equipment, namely the paint line, paint line robot, robot and intermediate coating paint shop air purifier, and installed 4 Sinexcel AVC - RTS - 50 used for the protection to voltage sag.
  • Site
    Guangzhou/Zhengzhou
  • Protected equipment
    Painting Workshop/Welding Workshop
  • Capacity
    Sinexcel AVC - RTS 200KVA
  • 02
    Semiconductor Manufacturer
    Semiconductor Manufacturer
    The original UPS has poor stability and cannot effectively protect the loads.
    After the installation of Sinexcel AVC-RTS on 1st May 2018, different levels of voltage sag happened for three times, Sinexcel AVC-RTS perfectly protected the equipment from the voltage sag and automatically record the events.
  • Site
    Shanghai
  • Protected equipment
    Double-sided polishing machine of DSP
  • Capacity
    Sinexcel AVC - RTS 600KVA
  • 03
    CLICK Power Supply
    CLICK Power Supply
    The site located near the sea, the weather there is always bad such as thunderstorm, lightning.
    In the SMT line, the placement machine and speed control system are very sensitive to voltage. The voltage sag not only results in the waste of production materials, but also causes great damage to the control board of the machine, even directly damage the control board.
  • Site
    Shenzhen
  • Protected equipment
    High-speed SMT placement machine
  • Capacity
    Sinexcel AVC - RTS 600KVA
  • 04
    LED panel
    LED panel
    This site is located near the coast. In summer, it often encounters severe weather such as thunderstorms, lightning and torrential rain.
    Extreme weather is an inevitable factor causing temporary voltage changes. It often stops sensitive equipment such as PLC and frequency converters in the panel assembly workshop, seriously affecting the production line efficiency, causing the delivery delay.
  • Site
    Taiwan
  • Protected equipment
    PLC system
  • Capacity
    Sinexcel AVC - RTS 200KVA
  • 05
    Beverage packaging factory
    Beverage packaging factory
    The main loads are production equipment such as the laminating machines, cooling water pumps and printers which are driven by AC motors.
    Affected by thunderstorm, there are more than 10 voltage sag events per year. After Sinexcel AVC-RTS was put into operation, it effectively protects the key production equipment and ensures the continuity of customer's production
  • Site
    Inner Mongolia
  • Protected equipment
    EPS6-200A PICCO load
  • Capacity
    Sinexcel AVC - RTS 600KVA
  • 06
    Cigarette factory
    Cigarette factory
    The production process cannot be protected which resulted in a waste of production capacity. In addition, each machine was recovered by manual, increasing the additional labor costs.
    After operating for half a year, the shutdown never happens again. Sinexcel AVC-RTS effectively protects the equipment from downtime and keeps continuous production
  • Site
    Wuhan
  • Protected equipment
    Roll electronic control equipment
  • Capacity
    Sinexcel AVC - RTS 300KVA
  • 07
    IT equipment industry
    IT equipment industry
    The PCBA surface mounting machine belongs to the high-precision control equipment which is extremely sensitive to voltage.
    Due to the influence of the external grid network, the voltage sag time occurred many times and the maximum sag depth reached 80%, resulting in surface mounting machine shutdown, production interruption.
  • Site
    Shanghai
  • Protected equipment
    PCBA surface mounting machine
  • Capacity
    Sinexcel AVC - RTS 300KVA
  • 08
    Heating project
    Heating project
    It's a project of heating supply system, the circulating water pumps of it needs to run for a long time, Sinexcel AVC-RTS are used to ensure the normal power supply of the water pump.
  • Site
    Lhasa
  • Protected equipment
    Circulating water pump
  • Capacity
    Sinexcel AVC - RTS 450KVA
  • 09
    Honda Car factory
    Honda Car factory
    Due to the voltage disturbance caused by external power grid fault and thunderstorm weather, directly leads to shutdown of equipment, causing serious impact on continuous production of users.
  • Site
    Guangzhou
  • Protected equipment
    Painting robot
  • Capacity
    Sinexcel AVC - RTS 200KVA
  • CONTACT US NOW

    Would you like to get information about Sinexcel? We appreciate your interest and would be happy to advise you.
    Simply give us some information so we can get in touch with you
  • Hotline 1
    0755-8651-1588
  • Hotline 2
    +86 15616829706
  • E-mail
    sales@sinexcel.com
  • Address
    1002 Songbai Rd,Nanshan Shenzhen China 518000
    • Charges vary depending on service provider and country/region
    • Free of charge from German landlines and mobile networks; callers from abroad,
      please use the international number
  • * Sinexcel responsible for your personal data. our Privacy Notice describes the various data protection rights that you have and how you can exercise... * Sinexcel responsible for your personal data. our Privacy Notice describes the various data protection rights that you have and how you can exercise these rights with regard to any information we process from you, such as the right to access or receive a copy of your information or to request deletion or correction of your information. In some cases, you may object to the further processing of your information and, where Sinexcel has asked for your consent to process information, you can withdraw this consent at any time.

    For more details about how we use personal data and on data privacy rights, please visit our full Privacy Notice.
    See more
  • Submitted successfully

    Details will be sent to your email later
    Close
    Details will be sent to your email later
    Close
    0755-8651-1588 sales@sinexcel.com